[EE] Senior System Electrical Engineer

  • Hanoi, Vietnam
  • Fulltime

1. About the role

We are hiring a Senior System Electrical Engineer for a humanoid robot preparing for mass production for the EU and US markets. You will own the electrical architecture of the whole robot: power, communication networks, the safety chain, the wire harness, and you will take the robot through safety, EMC and cybersecurity standards.

Level: Senior

Location: Hanoi, Vietnam

Type: Full-time

The goal of the System EE area: a robot that is compact, light and uses fewer wires, safe per ISO 13849 (target PL d), and certified for international markets.

2. Key responsibilities

System architecture and requirements

•          Build and maintain the robot’s overall electrical architecture (block diagram, zonal architecture) as the single source of truth for PCBA, firmware and mechanical teams.

•          Write system requirements and allocate them to each subsystem (compute, PDS, BMS, drives, sensors, audio front end, Connectivity Box) per ASPICE SYS.1–SYS.3, with traceability in Jira/Confluence.

•          Author and control the ICDs for every interface: power, EtherCAT, CAN-FD, Ethernet/TSN, PTP, safety signals (STO, FSoE), audio, cameras.

•          Own the robot-level power, thermal, mass and data-bandwidth budgets.

Power and wire harness

•          Design the 48V / 24V / 12V / 5V / 3.3V power distribution: per-branch eFuses, N+1 redundancy, hold-up, fall-critical power domain, regenerative energy handling.

•          Design the wire harness and select robot-grade connectors (vibration-rated, secondary locking, flex-rated cables at joints) in Altium; coordinate cable routing with mechanical engineering in SolidWorks.

•          Define the grounding, shielding and noise-control strategy for the whole robot.

Functional safety (FuSa)

•          Contribute to the ISO 12100 risk assessment, the “uncontrolled fall” FTA and the Hazard Log.

•          Design the robot-level safety chain: wired and wireless E-stop, STO, dual-channel motor power disconnect, brakes; target Category 3 / PL d per ISO 13849, ISO 13850 and IEC 61800-5-2.

•          Consolidate subsystem FMEDAs, calculate PL for the full chain in SISTEMA, and own the robot-level Safety Concept.

EMC and cybersecurity

•          Ensure the design meets EN IEC 61000-6-2 / -6-4 / -6-7 and FCC Part 15B; organize pre-scans and resolve EMC issues.

•          Build the robot-level cybersecurity architecture: network segmentation (zones / conduits per IEC 62443), secure boot and key management on all boards, debug-port lockdown, a controlled OTA path (EN 18031, UL 5500).

Integration, verification and certification

•          Build the HIL integration bench, plan system-level DVP, and run fault injection on every single point of failure.

•          Maintain the standards compliance matrix; work with test labs and notified bodies (pre-assessment, Technical File under EU Machinery Regulation 2023/1230, NFPA 79 / UL 1740).

•          Provide technical support to the PCBA team and mentor junior engineers in the area.

3. Requirements

•          Bachelor’s degree or higher in Electrical Engineering, Electronics, Automation, Mechatronics or equivalent.

•          5 to 7 years of experience in electrical system design, in one of: automotive / EV, robotics, industrial machinery, UAV, medical devices.

•          Hands-on ownership of the electrical architecture of at least one product taken to production: block diagram, ICDs, power budget, wire harness.

•          Solid knowledge of DC power distribution (48V and below): overcurrent protection, eFuses, ORing, pre-charge, wire and connector selection, voltage drop, thermal.

•          Working knowledge of industrial and automotive networks: EtherCAT, CAN / CAN-FD, Ethernet (TSN and PTP are a plus).

•          Functional safety knowledge: hands-on work with ISO 13849, ISO 26262 or IEC 61508; understands Category, PL, DC, MTTFd and dual-channel architectures.

•          Experience designing for EMC compliance and debugging EMC issues (grounding, shielding, filtering).

•          Proficient in at least one electrical / harness design tool: Altium, E3.series, EPLAN, Capital or equivalent; able to read 3D mechanical drawings.

•          Able to read and write technical documents in English (standards, datasheets, reports for test labs).

4. Nice to have

•          Has taken products through EU or US certification: CE (Machinery, EMC, RED), IEC 60204-1, NFPA 79, UL; or worked directly with TÜV, UL, SGS.

•          Experience with industrial robots, cobots, AMRs (ISO 10218, ISO 3691-4), or following ISO 25785-1 for actively stabilized robots.

•          Has designed systems with FSoE, STO, SS1, SLS; uses SISTEMA; holds a FuSa certificate (e.g., TÜV Functional Safety Engineer).

•          Experience with automotive zonal architectures, single-pair Ethernet (10BASE-T1S), A2B-type audio buses.

•          Understanding of lithium batteries and BMS (IEC 62133, UN 38.3), or power electronics / motor drives (GaN, SiC).

•          Embedded cybersecurity knowledge: IEC 62443, EN 18031, secure boot, TPM/HSM, OTA.

•          Experience working under ASPICE or a V-model process; uses Jira / Confluence.

•          Python skills to automate calculations (power budget, voltage drop, BOM) or HIL tests.

5. Soft skills and attributes

•          Systems thinking: sees the whole robot, not just one board; makes trade-offs between performance, mass, cost and safety.

•          Cross-functional collaboration: works daily with PCBA, firmware, control software, mechanical, DVP test, manufacturing and suppliers.

•          Documentation discipline: writes clear requirements, ICDs and reports with traceability; keeps versions and controls changes.

•          Safety first: willing to stop a change that has not been shown to be safe, even under schedule pressure.

•          Root-cause problem solving: uses log data and measurements to find causes when the robot fails, not guesswork.

•          Mentoring: reviews designs and coaches junior engineers.

6. Benefits and growth

•          Competitive compensation based on capability.

•          Own the electrical architecture of a humanoid robot from design through mass production and international certification.

•          Work with new technology.

•          Training and support toward certifications in functional safety, EMC and cybersecurity.

•          Two career paths: technical expert (Principal / System Architect) or management (System EE lead).

•          Encouraged to file patents and join the team’s innovation projects.

Similar job opportunities

Liên hệ

Business Cooperation

VinRobotics – Where robotics technology is created with the goal of serving and improving human life.